Real-time metal analysis, straight from the process line

Sensmet µDOES® brings ICP-OES class analysis to the plant floor: up to 30 metals measured online at part-per-billion sensitivity, with no carrier gas and no chemical reagents.

Book a demo
µDOES® online analyserExample stream: black mass leach liquorDischarge 1

Sample cell

A micro-discharge heats a tiny volume of the liquid to about 10,000 °C. The excited atoms emit light.

Emission spectrum wavelength, nm

Concentration g/L

Li670.8 nm2.41
Ni341.5 nm18.6
Co345.4 nm6.12
Mn403.1 nm5.34

Illustrative values and trends, not measured data. Line positions are standard reference wavelengths. Hover a peak or a row to link them.

Each element emits light at its own wavelength: lithium at 670.8 nm, nickel at 341.5 nm, cobalt at 345.4 nm, manganese at 403.1 nm.Water itself shows up as H and OH lines.

One analyser, every metal that matters to your yield

From the light alkali metals that challenge most online methods to the battery metals your recovery depends on.

LiLithium
NaSodium
MgMagnesium
KPotassium
NiNickel
CoCobalt
MnManganese
30metals in one run

From a drop of process liquid to a number in the control room

The patented µDOES® rethinks ICP-OES for continuous industrial duty. Four things happen, around the clock.

Sensmet engineer working inside an open µDOES analyser cabinet

Process liquid flows through the cell

A stream of your process water, brine or leach liquor runs through the measurement cell. No carrier gas and no chemical reagents are needed.

10,000 °C

A micro-discharge flashes inside the liquid

High-voltage pulses create an electric spark directly in the aqueous sample. A microscopic volume around it is flash-heated, and molecules break apart into atoms.

Ni CoMnNaLiK

Every metal answers in its own colour

Excited atoms fall back to their ground state and release light at characteristic wavelengths. The spectrometer reads them all at once.

Sensmet engineer checking analyser electronics in the lab

Concentrations reach your process control

The spectrum becomes metal concentrations, fully automated and 24/7, so operators can steer extraction and purification on live data instead of waiting for the lab.

Why measure online instead of sending samples to the lab

Continuous measurementReal-time readings instead of a few lab results per shift.
Fully automated100% automated operation with extended maintenance intervals.
Light elements includedLithium, sodium, magnesium and potassium, which many other methods struggle with.
Low cost of ownershipNo carrier gas and no chemical reagents to buy, store or dispose of.
Green chemistryNo consumable chemistry added to the measurement.
Field-provenRobust hardware built for industrial measurement, not the lab bench.
Sensmet mobile analyser trailer on site in winter, a technician connecting the sample line

Fifteen years of research, built into an industrial analyser

Sensmet designs and builds µDOES® in Oulu and tests customer samples at its Application Centre in Espoo.

Two Sensmet chemists preparing water samples in the laboratory
Patented µDOES®

Micro-discharge optical emission spectroscopy, a rethinking of ICP-OES for 24/7 field duty.

Backed by EIT RawMaterials

€1.5M raised in April 2026 to scale real-time metals monitoring for Europe's raw materials supply.

Test your own liquid

Send a sample to the Customer Application Centre in Espoo before you commit to an installation.

See µDOES® read your own process liquid

Book a demo with our application team and get a view of which metals we can follow in your stream, and how fast.

Book a demo or call +358 50 358 3097